規格

•流量：最高可達 240Liter /min。
•揚程：最高可達 176 m。
•馬力：2 to 15 HP。
•法蘭： JIS10K FF。
•軸封：機械軸封。

標準附件

•E型聯軸器。
•聯軸器護蓋。
•底座。

用途

•特別適合桶、槽 液體抽取。
•石化工業：有機溶劑、汽油、酒精、液化天然氣輸送。
•廢棄物處理業廢溶劑、廢機油純化處理後輸送。
•廢水曝氣處理。

特點

•吸力特強，可輕易抽乾桶槽底部殘留液體。
•適合低流量場合使用。
•適合含空氣液體輸送。
•多段串聯可獲得極高揚程。
•水力平衡設計，運轉平穩。
•出口壓力大，不需排氣閥。
•入口增加一組葉輪可獲得極低NPSHR值。
•尺寸相對比同揚程離心泵浦體積小，節省空間。

選用附件

•對接法蘭。
•三相馬達：208~480V60/50Hz。

Specification

•Flow: Up to 240Liter / min
•Head: Up to 176 m
•HP: 2 to 15 HP
•Flange: JIS 10K FF
•Shaft seal:Mechanical shaft seal

Standard Accessories

•E-type shaft coupling
•Shaft coupling protective hood
•Common base

Applications

•Particularlysuitable for tank, reservoir liquid extraction
•Petrochemicalindustry: Organic solvent, gasoline, alcohol, liquefied natural gasconveyance
•Conveyance of wastesolvents, waste engine oil after purification treatment by waste treatmentworks
•Wastewater exposuretreatment

Features

•Super-powerful suction force to easily extract all liquid remaining onbottom of tank
•Suitable for use in low-flow occasions
•Suitable for conveyance of liquids containing air
•Multiple-stage serial connection to obtain maximum head
•Hydraulic balance design, steady operation
•High pressure at outlet, no need of exhaust valve
•Additional one set of impellers at inlet to obtain minimum NPSHR
•Measurements are relatively smaller than the size of centrifugal pump havingthe same head, thereby saving space

Optional accessories

•3-Phase inductionmotor: 208~480V 60/50Hz
•Butt joint flange