規格
•流量:最高可達 5 m3/min。
•揚程:最高可達 90 m。
•馬力:1 to 100 HP。
•流體溫度:最高可達 90 ℃。
•法蘭:標準為 JIS10K RF。
•軸封:機械軸封。
標準附件
•底座。
•三相感應馬達:208~480V 60/50Hz。
用途
•高樓給水、消防給水。
•一般工業應用。
•空調、冷卻、加熱和循環設備給水。
特點
•設計尺寸依照DIN 24255/ EN733規範。
•機殼3.2 mm 腐蝕裕度,耐久性優良。
•與馬達同軸驅動,免馬達對心調整。
•結構簡單緊緻,適合較狹窄安裝空間使用。
•"背向拉出" (Back-pull-out)設計, 提供快速和簡單的拆卸和重組作業。
•入口端吸,中心線吐出向上,提供最佳管路支撐性。
•葉輪經動平衡處理,運轉平穩安靜。
選用附件
•對接法蘭。
Specification
•Flow: Maximum up to5m3/min
•Head: Maximum up to90 m
•HP: 1 to 100 HP
•Fluid temperature:Maximum up to 90 ℃
•Impeller: Closetype impeller
•Flange: StandardJIS 10K RF flange
•Shaft seal:Mechanical seal
Standard Accessories
•Common Base
•3-phase induction motor:208~480V 60/50Hz
Applications
•High-rise watersupply, firefighting water supply
•General industrialapplications
•Air conditioning,cooling, heating and circulating equipment water supply
Features
•Design dimensionscomply with DIN 24255/EN733 specifications
•Casing 3.2mmcorrosion tolerance, excellent durability
•Coaxial drive withmotor, no need to make shaft center alignment to the motor
•Simplified andcompact structure, suitable for narrow installation space
•Back-pull-outdesign, providing rapid and simple disassembly and re-assembly operation
•End suction,centerline discharge, providing the best pipe support ability
•Dynamic balancedimpeller, providing steady and quiet operation
Optional accessories
•Butt joint flange
:SCK.pdf