規格

•流量: 0.2~15M3/min壓力:標準型至12kg/cm2,特殊設計可達 50kg/cm2
•黏度:0.5~200,000CP 馬力:7.5~600HP
•傳動:直結式傳動
•材質:標準為鑄鐵,接受訂製304, 316不鏽鋼及其他特殊合金鋼材質

標準附件

•底座。
•E型連軸器。
•全閉式連軸器護蓋。

用途

•油井輸油管或鑽油平台原油輸送
•鍋爐或船舶燃油輸送
•油輪或油槽原油裝卸料
•石油化學工業製程泵浦

特點

•優異的自吸能力，能提供相當低的 NPSH值，可適用氣液混合性液體。
•運轉時振動與噪音甚小。
•液體移送時脈動小，為一完整且連續流動，液體不受攪拌不起泡。
•可安裝化工機械軸封、卡式機械軸封與卡式雙機械軸封。
•主、從動軸間無接觸，主、從動軸壽命特長。
•運轉時無軸向力產生，軸承壽命長。
•易於維修的結構設計，更換軸承、軸封時不需拆卸本體。
•可輸送含微小顆粒的液體。
•可使用的液體種類廣、黏度範圍大。
•可使用於需要高壓力的工作場所。

選用附件

•三相感應馬達：208~480V 60/50Hz。
•對接法蘭。
•馬達減速機。
•馬達變速機。
•壓力計。
•聯成計。
•安全閥。
•機殼夾套
•外沖軸封潤滑規範PLAN 11, 32, 52等。

Specification
•Capacity:0.2~15 M3/min
•Pressure: standardtype up to 12 kg/cm2 ; special design up to 50 kg/cm2
•HP: 7.5 to 600 HP
•Liquid temperature:0℃~150℃
•Viscosity: 0.5 cp ~200,000 cp
•Shaft seal:Standard : Universal Mechanical seal (EA560 ) ;Optional: Chemical mechnicalseal/ Cartridge single seal/Cartridge double seal
•Flange: StandardJIS 10K, Optional ANSI or DIN Flange
•Material:Standard /Cast iron, Optional 304, 316 stainless steel.

Standard Accessories
•E-type shaftcoupling
•Full-covered shaftcoupling protective hood
•Base plate

Applications
•Crude oil pipeline transfer
•Oil refinery
•Tank terminal load/unload
•Shipbuilding
•Power plant fuel pump
•Chemical industry process pump

Features
•From low to high viscosity, non-lubricating, high pressure or corrosivefluid can be transferred.
•Excellent self-priming performance with very good NPSH.
•Multi-phase fluid (Gas/liquid mixtures) can be handled. Liquid containing upto 80% of gas can be handled.
•Low noise level and fluid pulsations.
•The fluid is a continuous flow. No churning during transfer.
•Verities of mechanical seal options
•No screw-to-screw or screw-to-casing contact. Extremely low abrasion.
•Symmetrical, split-flow construction. No axial force.
•External bearing design with no contact to media for long life. Easy toreplace bearing.
•External installed mechanical seal. Easy for seal replacement. No need todismantle pump housing.
•Dry running possible with specially designed seal structure

Optional accessories
•Heating Jacket
•Safety valve
•3-Phase induction motor: 208~480V 60/50Hz
•Butt joint flange
•API shaft seal flushing plans Plan 11, 32, 52,53 etc.