規格

•流量：最高可達 1.6m3/min。
•壓力：最高可達30kg/cm2。
•馬力：1 ~ 75 HP。
•液體溫度：0℃~150℃。
•液體黏度：1 cp ~500,000 cp。
•軸封：填料、機械軸封。
•軸承座：標準全閉式。
•傳動方式：皮帶傳動。

標準附件

•底座。
•皮帶輪、皮帶。
•皮帶輪護蓋。

用途

•食品工業：糖漿、調味醬料、果醬、牛奶、油脂、和其它各種具黏稠度飲品……等。
•石化工業：潤滑油脂、重油和瀝青。
•化學產品：丙酮、乙醇、白明膠和DOP。
•藥品：二氧化碳、苯和氯化物。
•塑膠及合成樹脂：苯乙烯、塑化劑。
•塗料工業：塗料、瓷漆和油漆。
•紡織工業：人造纖維原料輸送。

特點

•內接式齒輪構造，齒型最佳化設計，磨耗最少、噪音低。
•皮帶傳動，可利用皮帶輪降低轉速，適用高黏度液體。
•構造簡單， 泵浦邊蓋拆卸容易，易於例行性保養。
•主動齒輪軸向間隙可外部調整，不必拆解泵浦。
•吸力特強，最高可達740mmHgG(20Torr) 。
•可安裝蒸氣夾套。
•可選擇內藏式安全閥，使泵浦過載時不致損壞。
•輸送含固體微粒液體可使用內齒外軸型製造。

選用附件

•三相感應馬達：208~480V 60/50Hz。
•對接法蘭。
•馬達減速機。
•馬達變速機。
•壓力計。
•聯成計。

Specification
•Flow: Up to 1.6m3/min
•Pressure: Up to 30kg/cm2
•HP: 1~75 HP
•Liquid temperature:0℃~150℃
•Liquid viscosity: 1cp ~ 500,000 cp
•Shaft seal: Glandpacking, mechanical seal
•Bearing bracket:Standard full close type
•Transmission: Beltdriven

Standard Accessories
•Common base
•Pulley, belt
•Pulley protectivecover

Applications
•Food industry: syrup, spices, jam, milk, cream, and other viscous drinks,etc.
•Petrochemical industry: Lubricating grease, heavy oil and asphalt
•Chemical products: Acetone, Ethyl alcohol, gelatin and DOP
•Drugs: Carbon dioxide, benzene and chloride
•Plastic and synthetic resin: styrene, plasticizer
•Coating industry: Coating material, ceramic paint and regular paint
•Textile industry: Conveyance of synthetic fiber materials

Features
•Inside connection type gear structure, gear style of optimized design, leastwear, low noise.
•Belt transmission, using pulley to reduce rotating speed, suitable forhigh-viscosity liquid
•Simplified construction, easy disassembly of side cover of pump, accessiblefor routine maintenance
•Axial clearance of driving gear can be adjusted on exterior, without havingto disassemble the pump
•Super powerful suction force, maximum up to 740mmHgG(20Torr)
•May install casing steam jacket
•May choose built-in safety valve, to prevent damage in case of overloadedpump
•May adopt internal gear external shaft design in conveyance of liquidcontaining fine solid particles

Optional accessories
•3-Phase induction motor: 208~480V 60/50Hz
•Butt joint flange
•Motor speed reducer
•Motor speed changer
•Pressure gauge
•Composite gauge