規格

•魯式泵浦+SR/SRD油迴轉真空泵複式組合。
•最大入口壓力：大氣壓力。
•排氣速度：2,000~200,000 Liter /min。
•最高真空：8 ×10-4 ~ 1×10-4 Torr (依機種不同)。
•理想操作真空：20 ~ 2×10-3 Torr (依機種不同)。
•馬力：依真空系統實際需求配置。
•空氣管：標準為PU管，可選用銅管或SUS 304、SUS 316 不鏽鋼管。

標準附件

•基礎台。
•聯軸器護蓋或皮帶輪護蓋。
•泵浦底座。

用途

•潔淨氣體乾式製程之真空抽氣。
•科學實驗。
•真空鍍膜。
•真空斷熱。
•真空熱處理。
•真空燒結。
•真空冷凍乾燥。
•真空成型。
•真空滅菌。
•真空結晶。
•真空發泡。

特點

•專利差壓控制方式，大幅縮短到達指定真空度的工作時間。
•採前後級泵浦複式組合，在操作真空下的排氣量特大。
•運轉效率特高，可節省高額電費。
•節省安裝空間，系統所有裝置均在同一基礎台上。
•所有操作程序及閥門控制均高度自動化，使用簡便。
•操作安全，具系統過載保護設計，使泵浦不虞損壞。
•保養容易，所有潤滑裝置均為自動方式，僅需定期檢視。

選用附件

•三相感應馬達：208~480V60/50Hz。
•水氣分離桶。
•空氣噴射器。
•控制閥。
•真空計。
•流量計。
•循環式配管。
•防爆開關。
•PLC控制器。
•其他客戶指定之配件。

Specification
•Roots pump +SR/SRDoil-sealed rotary vacuum pump in duplex combination
•Maximum inletpressure: Atmospheric pressure
•Pumping speed:2,000~200,000 Liter /min
•Maximum vacuum: 8×10-4 ~ 1×10-4 Torr (depending on different models)
•Practical operationvacuum: 20 ~ 2×10-3 Torr (depending on different models)
•HP: Installed tomeet actual requirement of vacuum system
•Air pipe: StandardPU pipe, or optional copper pipe or SUS 304, SUS 316 stainless steel pipe

Standard Accessories
•Foundation base
•Shaft couplingprotective cover or pulley protective cover
•Pump base

Applications
•Vacuum pumping for clean gas dry production
•Scientific experiment
•Vacuum plating of film
•Vacuum heat insulation
•Vacuum heat treatment
•Vacuum sintering
•Vacuum refrigeration and drying
•Vacuum forming
•Vacuum sterilization
•Vacuum crystallization
•Vacuum foaming

Features
•Patented differential pressure control, significantly shortens working timeto reach specified degree of vacuum
•Adopt front-rear pump duplex combination, super large pumping volume undervacuum operation
•Super-high operating efficiency, saving high cost of power consumption
•Saving installation space, all system devices are on a same foundation base
•All operational procedures and valve control are highly automated, easy andconvenient operation
•Safe operation, with system overload protection design, to ensure no damageto the pump
•Easy maintenance, all lubricating devices are automated so they only requireregular inspection

Optional accessories
•3-phase inductionmotor: 208~480V 60/50Hz
•Moisture separatingtank
•Air ejector
•Control valve
•Vacuum gauge
•Flow gauge
•Water circulatingpipe fitting plan
•Anti-explosiveswitch
•PLC-base controlpanel
•Other accessoriesspecified by customer