規格
•流量:最高可達 16 m3/min。
•揚程:最高可達 140 m。
•馬力:1 to 250 HP。
•葉輪:密閉式。
•法蘭:標準為 JIS 10K RF。
•軸封:填料、機械軸封、卡式軸封。
•軸承座:標準型(雙防塵蓋全閉式軸承)。
重負載型(油潤式軸承+迷宮式油封)。
標準附件
•E型聯軸器。
•聯軸器護蓋。
•底座。
用途
•製程用泵浦。
•石化工業、紡織染整工業、食品工業、化學工業、一般工廠給水、高樓給水、冷卻水、循環水、廢污水處理及強酸鹼腐蝕液、高溫高壓液體等特殊液體皆可使用。
特點
•性能符合ISO 2858 / EN22858要求。
•設計尺寸依照DIN 24255/ EN733規範。
•機殼3.2 mm 腐蝕裕度,耐久性優良。
•"背向拉出" (Back-pull-out)設計, 提供快速和簡單的拆卸和重組作業。
•入口端吸,中心線吐出向上,提供最佳管路支撐性。
•葉輪經動平衡處理,運轉平穩安靜。
•支援API振動規範及軸封沖洗規範。
•針對重負載作業提供強化版本。
選用附件
•三相感應馬達:208~480V 60/50Hz。
•對接法蘭。
Specification
•Flow: Maximum up to 16m3/min
•Head: Maximum up to 140m
•HP: 1 to 250 HP
•Impeller: enclosed type
•Flange: Standards of JIS 10K RF
•Shaft seal: Gland packing, mechanical seal, cartridge type mechanical seal
•Bearing bracket: Standard type (maintenance free greased bearing with anti-dust cover)
•Heavy-duty type ( Oil-lubrication angular contact bearings + labyrinth seal)
•Material:FC200 cast iron, 304/316/316L stainless steel, monel alloy
Standard Accessories
•E-type shaft coupling
•Shaft coupling guard
•Base
Applications
•Process Pump
•Petrochemical industry, textile dyeing and finishing industry, food industry, chemical industry, general factory water supply, high-rise water supply, cooling water, circulating water, sewage treatment and highly alkaline and acid corrosion liquids, high temperature high pressure liquids, and all other special liquids may be used.
Features
•Performance satisfactory to ISO 2858 /EN22858 requirement .
•Design dimensions comply with DIN 24255/EN733 regulations.
•Casing 3.2mm corrosion tolerance, providing excellent durability.
•Back-pull-out design, providing rapid and simple disassembly and re-assembly.
•End suction, centerline discharge, providing the best pipe support ability.
•Dynamic balanced impeller, providing steady and quiet operation
•Supports API vibration regulation and shaft seal flushing plans.
•Provides reinforced edition for heavy-duty operation
Optional accessories
•3-Phase induction motor: 208~480V 60/50Hz
•Butt joint flange
:SCH_SCD_SCK.pdf